NEW: THE INICRON ROM-RAM-BOX !

What is a ROM-RAM-BOX ?

The ROM-RAM-BOX ist a ROM-BOX which does not need any EPROMs ! Up to 8 
(16)  EPROMs  can  be   stored   in  the  accu-buffered  simulator-RAM 
(128KB/256KB capacity).

In addition to the eight (sixteen)  'RAM-ROM slots' with 16KB capacity 
each, the ROM-RAM-BOX offers  a  'normal' EPROM-socket for EPROMs with 
8-64KB capacity. This  EPROM-socket  either  serves  as  a  source for 
programs to be placed in  the  'RAM-ROM  slots'  or you can run EPROM-
software in it.

ROM-software can be installed very easily in the ROM-RAM-BOX or it can 
be saved on disc. Loading  and  installing  of  'EPROMs' is as easy as 
saving. Just load the 'EPROM' from disc and install it in the box. You 
see, you can handle ROMs as easy as 'normal' programs.

The BOX gives you a whole new  range of possibilities ! You don't need 
expensive EPROMs anymore. EPROM-programmers  and  UV-lamps  can be put 
aside. It really gets easy  to  develop  new  ROM-software or to patch 
ROMs since you don't have  to  erase  and re-burn EPROMs anymore. Just 
install the software in the ROM-RAM-BOX !

The 'RAM-ROMs' in the ROM-RAM-BOX can  be  used just like if they were 
in a 'normal' ROM-BOX. Every program that runs in a ROM-BOX wil run in 
a ROM-RAM-BOX, too. The only  difference  is the much more comfortable  
handling of the 'RAM-ROMs'.

The installation of ROM-software  in  the  BOX  can  be  done with the 
completely menu-driven SOFTBRENNER. This nice  piece  of code (it will 
be constantly  updated!)  gives  you  total  control  over  EPROMs and 
ROM-software. You can load  and  install  'RAM-ROMs' from disc, 'grab' 
the contents of EPROMs and save it  to disc, display RSX commands etc. 
But that's not all: You can very easily generate you own ROM-programs. 
Binary & Basic programs can be transformed into BOOT-ROMs at the touch 
of a button.
Example: transform SMON or DISC'O'MAGIC into a BOOT-ROM install it and 
you can use one of the programs just by typing a RSX command.

While the computer is in operation, the accumulator in the ROM-RAM-BOX 
is constantly charged so  that  the  'RAM-ROMs'  in  the simulator-RAM 
remain intact even when the computer is switched off.

The 'RAM-ROM sockets' in the ROM-RAM-BOX have ROM-numbers from 0-7
(0-15), the ROM-number of the  EPROM-socket  can  be chosen from 0-15. 
The eight  (sixteen)  'RAM-ROM  slots'  and  the  EPROM-socket  can be 
switched on and off. This comes in handy if some software does not run 
with ROM-software installed. 

The ROM-RAM-BOX has to be connected  to the CPC expansionport. The bus 
is led through the  box  so  that  other  expansions (harddisc, memory 
expansion, etc.) can be used, too. 

The BOX features a reset-switch (plus compatible) as an 'extra bonus'.

The INICRON ROM-RAM-BOX  is  revolutionary,  useful  and "probably the 
best ROM-BOX ever for the CPC".

The BOX is supplied together with a SOFTBRENNER-disc, utility programs 
and an instruction manual.

The prices:

Normal version 128KB = eight 'RAM-ROM  slots' : 60 + p&p
Tuned version 256KB  =sixteen 'RAM-ROM slots' : 60+  12.5 + p&p

For further information please write to:
Ingo Willers
Horststr. 9
31061 Alfeld/Leine
Germany
Tel.:(0049) 5181 5765
